Commercial Solar Solutions for Buildings, Malls & Institutions
Commercial establishments pay some of the steepest electricity tariffs in the country — and their daytime-heavy loads are exactly what solar serves best. From the 485 kW system on Inorbit Mall, Vadodara to campus installations for educational institutions, we turn under-used roofs into dependable generating assets.
- Typical systems
- 25 kW – 1 MW+
- Reference project
- 485 kW · Inorbit Mall
- Indicative payback
- 3–5 years
- Module warranty
- 25–30 yr performance
Scope of work
What we deliver
Malls & commercial buildings
Rooftop systems engineered around HVAC equipment, services and shadow patterns — offsetting common-area and tenant loads at the highest commercial tariffs.
Educational institutions & campuses
Elevated and roof-mounted systems for schools, colleges and universities — like our 40 kW installation at Vadodara Institute of Technology.
Hospitals & healthcare facilities
Carefully staged execution with safe access, clean cable routing and zero disruption to round-the-clock critical operations.
Net metering & documentation
Complete GEDA, DISCOM and CEIG liaisoning — plan approval, charging permission and net metering paperwork handled for you.
The commercial case: your roof is a tariff hedge
Commercial consumers routinely pay the highest per-unit tariffs of any category. A correctly sized rooftop system supplies a large share of a building's daytime consumption at a levelized cost far below the grid rate — and offices, malls, schools and hospitals all consume most of their power exactly when the sun is generating.
Under net metering, surplus units exported on holidays are credited against your bill; where policy restricts it, we configure export-limited systems so you capture savings without regulatory friction. We model your tariff structure and consumption before you commit, so the decision is made on real numbers from a free consultation.
Execution designed around an open-to-public building
Commercial sites can't close for construction. Our delivery model — site induction, permits-to-work, PPE and lifelines, electrical isolation controls and housekeeping — is built for occupied premises. Lifting, cabling and tie-in works are scheduled around your operating hours, and grid interconnection is completed in planned shutdowns measured in hours.
That discipline is why institutions and corporate clients come back: more than 10 corporate clients have awarded us repeat business.
Ownership models to suit your balance sheet
Most commercial clients buy their systems outright (CAPEX) for maximum lifetime savings and accelerated depreciation benefits. If you prefer minimal upfront investment, talk to us about structuring alternatives during the consultation — we'll lay out honest 25-year cash flows for each route so your finance team can decide with clarity.
FAQ
Commercial Solar — common questions
Will installation disrupt our business or visitors?
No. Works are staged around your operating hours under permit-to-work controls with dedicated safe-access provisions. The only planned outage is a brief, pre-agreed shutdown for final grid tie-in.
How much roof area do we need?
Roughly 85–100 sq ft of shadow-free area per kW on flat RCC roofs. A 100 kW system therefore needs about 8,500–10,000 sq ft — our shadow analysis during the free site visit establishes exactly what your roof can host.
What happens to excess power on weekends and holidays?
Under net metering, exported units are credited to your electricity bill. Where net metering isn't available for your category, we configure export limitation so the system precisely matches your consumption.
Can you handle multi-building campuses?
Yes. We design distributed arrays with centralized monitoring across buildings — as with our elevated-structure campus installation at Vadodara Institute of Technology — with each building's structural and shadow conditions engineered individually.
Start saving from your next bill
Planning commercial solar for your facility?
Tell us about your facility and consumption — our engineers respond within one working day with a feasibility view and indicative savings.